Samson 3725 series, Mounting And Operating Instructions

Page: 39 / 68

EB 8394 EN 39
Operation
6.1.3 Display
Icons which are assigned to certain codes and functions are indicated on the display
(Fig. 16). The bar elements indicate the system deviation that depends on the sign (+/–) and
the value. One bar element appears per 1 % system deviation.
If the positioner has not yet been initialized, the lever position in degrees in relation to the
mid-axis is indicated. One bar element corresponds to approximately a 7° angle of rotation.
If the fault indication icon is displayed, press
or until ERR is displayed to view the
E0 to E15 error codes (see section 9.2).
Reading Meaning
ESC Stop
Err Malfunction
LOW w too low
MAN Manual mode
MAX Maximum range
RST Reset
INIT Initialization
ON/OFF Activated/deactivated
ZERO Zero calibration
%
S
mm
%
mm
Confirm
Up
Settings not yet saved in a
non-volatile memory
Unit
Bar graph for system
deviation
Fault
Manual mode
Closed-loop control
Parameter/error code
Fail-safe position active
Operation locked
Down
Fig. 16: Display with all readings