Samson 3241 Mounting And Operating Instructions Download Page 2 | Manualshive

Page: 2 / 64

Samson 3241 Mounting And Operating Instructions Download Page 2

Definition of signal words

DANGER!

Hazardous situations which, if not
avoided, will result in death or seri-
ous injury

WARNING!

Hazardous situations which, if not
avoided, could result in death or seri-
ous injury

NOTICE

Property damage message or mal-
function

Note:

Additional information

Tip:

Recommended action



2

EB 8012 EN

Note on these mounting and operating instructions

These mounting and operating instructions assist you in mounting and operating the device
safely. The instructions are binding for handling SAMSON devices.

Î

For the safe and proper use of these instructions, read them carefully and keep them for
later reference.

Î

If you have any questions about these instructions, contact SAMSON‘s After-sales Service
Department ([email protected]).

The mounting and operating instructions for the devices are included in
the scope of delivery. The latest documentation is available on our website
(www.samson.de) > Product documentation. You can enter the document
number or type number in the [Find:] field to look for a document.

«
1
2
3
4
...
»

Summary of Contents for 3241

































































Reviews:

No comments