Samson 3241-1-Gas, Mounting And Operating Instructions

Page: 53 / 56

EB 8020-1 EN 53
10.3 Spare parts
1 Body (valve)
2 Flange
4 Seat
5 Plug (with plug stem)
7 Guide bushing (flange)
8 Threaded bushing (packing nut)
9 Stem connector nut
10 Lock nut
11 Spring
12 Washer
13 Stud bolt
14 Body nut
15 Packing
16 V‑ring packing
17 Body gasket
19 Bushing
22 Bellows seal
24 Guide bushing
27 Flange
28 Clamping ring
29 Plug for version with bellows seal
30 Retaining washers
31 Washer
32 Screw
33 Nut
34 Bolt
37 Plug stem with metal bellows
39 Gasket
41 Nut
42 Screw plug with seal
80 Valve nameplate
81 Grooved pin
82 Screw
83 Hanger
84 Travel indicator scale
91 Protective cap
210 Nameplate for gas version
212 Plate with DVGW register number
S1 Body (strainer)
A1 Top diaphragm case
A2 Bottom diaphragm case
A4 Diaphragm
A5 Diaphragm plate
A6 Hose clamp
A7 Actuator stem
A8 Ring nut
A9 Hex nut
A10/
11/12
Spring
A15 Collar nut
A16 Vent plug
A20 Hex bolt
A21 Hex nut
A22 Hex bolt (preloading)
A23 Hex nut (preloading)
A24 Blanking plug
A25 Shim
A26/27 Stem connector clamp
A28 Bracket
A29 Hex bolt
A30 Hex nut
A32 Hanger
A40 Radial shaft seal
A41 Wiper ring
A42 Dry bearing
A43 Hex bolt
A100 Nameplate
A106 Grooved pin
The exploded diagram shows a Type 3241G
with a Type 3271 Pneumatic Actuator with
350 cm² actuator area. Other exploded
diagrams, e.g. with other actuator sizes, are
available at
u
www.samsongroup.com >
Service & Support > Downloads >
Documentation.
Note