Samson 2439, Mounting And Operating Instructions

Page: 7 / 40

EB 2185 EN 7
Safety instructions and measures
Referenced standards and regulations
The devices comply with the requirements of the European Pressure Equipment Directive
2014/68/EU. Devices with a CE marking have an EU declaration of conformity, which in -
cludes information about the applied conformity assessment procedure. This EU declaration
of conformity is included in the Appendix of these instructions (see section 9.3).
Non-electric valve versions whose bodies are not lined with an insulating material coating do
not have their own potential ignition source according to the risk assessment stipulated in
EN 13463-1: 2009, section 5.2, even in the rare incident of an operating fault. Therefore,
such valve versions do not fall within the scope of Directive 2014/34/EU.
Î
For connection to the equipotential bonding system, observe the requirements specified in
section 6.4 of EN 60079-14 (VDE 0165 Part 1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
−
Mounting and operating instructions for valves, e.g.
Type 2431 and Type 2432
u
EB 2171
Types 2435, 2437 and 2436
u
EB 2172
Type 2433
u
EB 2173
− Mounting and operating instructions for the control thermostat, e.g.
Type 2430
u
EB 2430
u
EB 2430-3
−
Mounting and operating instructions for the safety temperature monitor, e.g.
Type 2403
u
EB 2183
− Mounting and operating instructions for the accessories, e.g.
Double adapter Do3 and
manual adjuster
u
EB 2176