Samson 2439, Mounting And Operating Instructions

Page: 31 / 40

EB 2185 EN 31
Operation
6.4 Maintenance
The safety temperature limiter does not re-
quire any maintenance. Nevertheless, it is
subject to natural wear, particularly at the
soldered joints.
Risk of burn injuries due to hot or cold com -
ponents and pipeline.
Valve components and the pipeline may be -
come very hot or cold. Risk of burn injuries.
− Allow components and pipelines to cool
down or heat up.
− Wear protective clothing and safety gloves.
Risk of damage to the valve or safety tem -
perature limiter due to excessively high or
low tightening torques.
The connection between valve and safety
temperature limiter must be tightened with a
certain tightening torque. Excessively tight -
ened torques lead to parts wearing out
quicker. Parts that are too loose may cause
leakage.
Observe the specified tightening torques.
WARNING !
NOTICE
!
The safety temperature limiter was checked
by SAMSON before it left the factory.
−
Certain test results certified by SAMSON
lose their validity when the safety tempera-
ture limiter is opened.
−
The certification according to
DIN EN 14597 loses its validity when the
safety temperature limiter is opened.
SAMSON's After-sales Service department
can support you in drawing up an inspection
and test plan for your plant.
Note
Tip