6
EB 2522 EN
Safety instructions and measures
Operators are additionally responsible for ensuring that the limits for the product defined in
the technical data are observed. This also applies to the start-up and shutdown procedures.
Start-up and shutdown procedures fall within the scope of the operator's duties and, as such,
are not part of these mounting and operating instructions. SAMSON is unable to make any
statements about these procedures since the operative details (e.g. differential pressures and
temperatures) vary in each individual case and are only known to the operator.
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the referenced documents and observe the specified hazard statements, warnings
and caution notes. Furthermore, operating personnel must be familiar with the applicable
health, safety and accident prevention regulations and comply with them.
Referenced standards, directives and regulations
The devices comply with the requirements of the European Pressure Equipment Directive
2014/68/EU. Devices with a CE marking have an EU declaration of conformity, which in-
cludes information about the applied conformity assessment procedure. The EU declaration
of conformity is included in the annex of these instructions (see section 9.2).
Non-electric valve versions whose bodies are not lined with an insulating material coating do
not have their own potential ignition source according to the hazard assessment stipulated in
Clause 5.2 of ISO 80079-36, even in the rare incident of an operating fault. Therefore, such
valve versions do not fall within the scope of Directive 2014/34/EU.
Î
For connection to the equipotential bonding system, observe the requirements specified in
Clause 6.4 of EN 60079-14 (VDE 0165-1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
−
Mounting and operating instructions for
e.g.
Type 2 N/NI Strainer
u
−
Data sheets for
e.g.
Type 2 N/NI Strainer
u
−
Mounting and operating instructions as well as data sheets for additional components
(e.g. shut-off valves, pressure gauges etc.).
Summary of Contents for 2406
Page 31: ...EB 2522 EN 31...
