Samson 08-5000, Manual

Page: 7 / 14

7
The W
heatgrass Juicer is equipped
with a Circuit Breaker to protect it
from damage due to overload or
short circuit. If the Wheatgrass Juicer
should unexpectedly stop running,
take the following steps to get it
running again.
1.
Turn the Power Switch to the
“OFF” ( O ) position.
2.
Check for possible reasons for the
overload, i.e., a jam in the machine
or incorrect assembly.
3.
Press the Circuit Breaker Reset Button (FIGURE 5).
4.
Turn the Wheatgrass Juicer back on.
5.
Resume normal operation.
If the Wheatgrass Juicer still does not run, check the circuit breaker to see if it
has tripped and/or try connecting the Power Cord to a different electrical outlet.
If these steps don’t work or if the Circuit Breaker repeatedly trips, turn the unit off
and disconnect it from the electrical outlet. DO NOT continue to try running the
Wheatgrass Juicer or unit damage may occur. See page 3 for Technical Services
information.
FIGURE 5
Circuit Breaker
Reset Button
CIRCUIT BREAKER INSTRUCTIONS
1.
Turn the Wheatgrass Juicer to the “OFF” ( O ) Position. Disconnect Power Cord
from the electric outlet.
2. Loosen the Head-Aligning Cap (on the Head) by turning it clockwise. DO NOT
REMOVE the Head-Aligning Cap at this time. Use the Head-Aligning Cap
Wrench if necessary.
3. Loosen the Head-Locking Screw on the Juicer Motor until it releases the Head
Assembly.
4.
Remove the Head-Assembly from the Juicer Motor.
5.
Unscrew the Head-Aligning Cap from the Head by turning it clockwise.
6.
Unscrew the Waste Valve from the Head-Aligning Cap by turning it clockwise.
7.
Remove the Rubber Gasket from the Head-Aligning Cap.
8.
Remove the Auger and Screen from the Head.
9.
Allow the parts to air-dry before reassembling and storing the Wheatgrass
Juicer.
10. The Wheatgrass Juicer is NOT dishwasher-safe.
DISASSEMBLY INSTRUCTIONS
w
WARNING Entaglement Hazard.
Disconnect power before cleaning, disassembling, or assembling.