Questions?
samsara.com/support
AG24 Installation Guide
4
10
9
11
12
14
13
Turn ON power switches to complete install.
Connect 7-way cable to 7-way trailer connector.
See connection pin diagram illustrated above (some
trailers may vary). Connect BLUE (POS+) lead to Aux
power (BLU), BROWN (POS+) lead to tail lights (BRN),
and WHITE (NEG-) lead to ground (WHT). If backup
power is not desired, BROWN (POS+) lead can be left
floating.
Plug AG24 end of Y-cable into AG24 and twist to
secure. AG light turns on for 30 seconds when
correct.
Run 7-way cable along frame to trailer connector.
Fasten to trailer with zip ties and self-tapping
screws.
Mount AG24 onto mounting plate with 4 flat-end
screws (bag 2).
Attach mounting plate with adhesive. Secure with 4
self-tapping screws (bag 1) if desired.
