background image

PM

Professional equipment

elektronik

Sams elektronik d.o.o. • [email protected] • www.sams.rs

10

This program controls the routing switcher.

Designed as a replacement of the main commands.

The  program  is  used  only  in  Windows  OS.  It  is  recommended  to  be  used  on  newer  types  of 

computers.

To view the entire program window minimum screen resolution must be 1024x768px.

Also, the computer must have a free serial port (RS-232) to communicate with the routing switcher.

Installation is simple. Insert the installation CD into the CD-ROM. If the installation itself does not start, 

open the contents of the disc and double-click setup.exe.

Start  the  program  (Figure  1).  Press  the  “Properties”  button  (Figure  2)  to  set  the  communication 

parameters. It is very important to choose the correct serial port to COM selection. If the correct port is 

selected and if routing switcher is connected to a PC, the “COM OK” green colors will appear. It will not 

be included if you do not connect properly or if routing switcher is turned off.

If you want to control the routing switcher using a PC, press PANEL LOCK on the front panel of the 

remote control. Red indicator “PC ENABLE” will appear instead of “OK COM”. Destinations that were 

previously locked will not be used.

Using the program is simple. Place the arrow at the intersection (XY) and press the left mouse button. 

The parameters for this intersection will appear with the selection VIDEO-AUDIO 1-AUDIO 2. When you 

choose press the OK button. The connection is established and it can be seen on the screen. If you want 

to save your connections status press the SAVE button. If you want to load some of the saved status of 

the connections, press LOAD button.

You can lock the PC panel by pressing the LOCK button on the menu. Unlocking is done closing window 

UNLOCK on the center of the screen. If you want to lock certain destinations press button KEY. In the 

same way it unlocks. By pressing UNDO return to the previous state of the selected intersection.

Recommended configuration:

- Intel or AMD compatible

- 256Mb RAM

- Windows XP

- Resolution min 1024x768

NOTES

Summary of Contents for PM-88va2lcd











Reviews: