INSTALLATION METHOD FOR WALL MOUNTING
Set-up steps
1. Set up the roll bars marked 1,2,3,4.
2. Put the two roll bar terminals into the wall-mounting angle. Then fix them in place with M4 size screws.
They are marked 5,6,7,8.
3. Use the 3/8” driver head to fix the wall-mounting angle. The wall-mounting angle must be fixed to cement
Wall.
4. Set up the wall mounting frame and set.
a. Put the fixing screws in the gutter of the wall-mounting frame.
b. Fix the frame with 4 M5X10 size screws.
Part description
A. fix roll bar
B. fix roll bar
C. left side of wall mounting angle
D. right side of wall mounting angle
E. fixing screw
F. wall mounting frame and fixing screws M5X10 size
G. wall mounting frame and roll bar fixing screws M4X16 size
Note
1. The force for fixing M4X16 size screws should be 15Kg/cm.
2. The force for fixing M5X10 size screws should be 20Kg/cm.
3. The force for mounting screws should be 30Kg/cm.
4. The set must be mounted on a cement wall.
-20-
2 PCS
2 PCS
1 PCS
1 PCS
8 PCS
4 PCS
4 PCS
