Sampo PME-42V3, User Manual

Page: 19 / 23

SPECIFICATIONS (Preliminary)
1. Display panel
a. Screen size
b. Aspect ratio 16:9 wide
c. Number of pixels 852(Horizontal, RGB Trio ) X 480(Vertical)pixels
d. Pixel pitch 1.08mm X 1.08mm
e. Luminance 350cd/m
2
,at APL13%
2. Power
a. Input voltage 100 ~ 240 Vac , 50 / 60 Hz
b. Input current 3.3A
c. Inrush current 60 A p-p/20ms max
d. Power consumption
340
±
10% Watt ( at 110Vac/color bar pattern)
e. Stand-by & DPMS 5 watt Max (at 110Vac)
3. Connector type 15 pin dual D-SUB and RCA JACK and S-terminal
24 pin DVI connector
9 pin D-SUB
BNC for RGB or YPBPR or YCBCR
4. AV/S-VIDEO signal
a. Type Analog
b. Polarity Positive
c. Amplitude
d. Frequency AV: 1Vp-p S-VIDEO: =1Vp-p C=0.286Vp-p
H: 15.734KHz V: 60Hz(NTSC)
H: 15.625KHz V: 50Hz(PAL)
e. Input impedance 75 ohm
5. YCBCR or YPBPR signal
a. Type
b. Polarity Analog
Positive
c. Amplitude AV: 1vp-p (with sync)
d. Frequency
YCBCR
YPBPR: HDTV
Priorites: Y: 1Vp-p c: 0.286Vp-p
H: 15.734KHz V: 60Hz (NTSC)
H: 15.625KHz V: 50Hz (PAL)
1. 31KHz/60Hz (480P)
2. 45KHz/60Hz (720P)
3. 33KHz/60Hz(1080I)
6. BNC RGB/RGB signal
a. Type
b. Polarity TTL
Positive or negative
c. Amplitude RGB: 0.7Vp-p
d. Frequency H: support to 31K~91KHz
V: support to 50~85Hz
-17-