SamplexPower SEC-1212P, Owner'S Manual

Page: 5 / 24

SAMLEX AMERICA INC. | 5
SECTION 2 | Layout & Dimensions
2.1 SEC-1212P
2
4
3
4
3
1
7
5 5
Overall Dimension: 185 x 208 x 57.8 mm
(with protrusions) 7.28 x 8.19 x 2.28 in
6 Bottom View
190
57.8
180
180
185
2.5
2.5
208
4.5
53.3
Figure 2.1 Layout & Dimensions - SEC-1212P
LEGEND for Fig 2.2
1. Lighted Power ON/OFF Rocker Switch (Lights Red when ON)
2. AC Power Cord Inlet: Type “IEC 60320-C14” for detachable power cord with
“IEC 60320-C13” connector on one end and country specific plug on the other end.
3. Black Negative (-) DC Load Terminal
Ÿ
Tubular hole Dia 5mm/0.2” and set screw (5/64” Hex Socket Head, #10, 24 TPI,
5/16” long)
*See Note 2
4. Red Positive (+) DC Load Terminal
Ÿ Tubular hole Dia 5mm/0.2” and set screw (5/64” Hex Socket Head, #10, 24 TPI,
5/16” long)
*See Note 2
5. Air cooling slots in the top cover for cooling by convection
6. Air cooling slots at the bottom housing for cooling by convection
7. Lanced tab that slides into corresponding slot in the bottom housing. (There is one more
lanced tab on the other corresponding side of the top cover).
NOTES: 1. The top cover will fit properly only when the 2 lanced tabs (7, Fig 2.1) are oriented
towards the DC output terminals 3 and 4 .
2(a). 5/64” Hex Key and 2 spare set screws have been provided.
2(b). 2 pieces of Pin Type Terminals (for wire size up to AWG#8) have also been provided
for crimping to bare stranded wire ends of load wiring for firm contact under the
set screws.