SamplexPower MSK-135 Owner'S Manual Download Page 3

2  |  SAMLEX AMERICA INC.    

 

    

SAMLEX AMERICA INC.  |  3

SECTION 1  |  

Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE USING THE KIT. FAILURE TO ABIDE 
BY THE RECOMMENDATIONS MAY CAUSE PERSONAL INJURY / DAMAGE.

The following safety symbols will be used in this manual to highlight safety  
and information:

 

 

 

WARNING!

Indicates possibility of physical harm to the user in case of non-compliance.

 

!

  CAUTION!

Indicates possibility of damage to the equipment in case of non-compliance.

 

i

    

INFO

Indicates useful supplemental information. 

 

 

WARNING!  

!

  CAUTION!

1.  Although the solar modules are waterproof (Ingress Protection Rating is IP-65), 

the charge controller MSK-10A attached at the back of one of the modules is not 
waterproof (Ingress Protection Rating is IP-30). PLEASE ENSURE THAT THE KITS ARE 
INSTALLED IN DRY ENVIRONMENT 

2.  The design of the Charge Controller allows ONLY Positive grounding where 

required. Ground the Positive terminal of the solar array input on the Charge Con-
troller or the Positive terminal of the battery. DO NOT ground the Negative

3.  To reduce the risk of injury, charge only 12V Lead Acid Batteries - Sealed/AGM 

types.  Other types of batteries may be subject to bursting which can lead to per-
sonal injury and damage. 

4.  Comply with battery manufacturer’s recommendations 
5.  Avoid charging damaged, defective or old battery. 
6.  Ensure correct polarity is maintained when connecting the Charge Controller to the 

battery - Connect the Positive Battery Clip (Red) to the Positive Battery Post and the 
Negative Battery Clip (Black) to the Negative Battery Post. Reversal of polarity con-
nection will blow the inline protective fuse.  

7.  When charging, removal of the battery from the vehicle is not necessary provided 

the battery is being charged in a well-ventilated area. 

8.  Batteries contain very corrosive diluted Sulphuric Acid as electrolyte. Precautions 

should be taken to prevent contact with skin, eyes or clothing. If the battery acid 
makes contact with skin or clothing, flush immediately with water. See a doctor 
immediately. 

Summary of Contents for MSK-135

















Reviews: