background image

www.larius.com

6

P31 2:1

REV.

 01 - 09/2020 - Cod. 150169

H

Fig. 1H

Pos. Description

1

P31 long pump

Air inlet

3

Product outlet

4

Pumping tube

5

200 lt drum

1
2

3

4

5

The high speed of travel of the product in the hose 

can create static electricity through discharges 

and sparks. It is suggested to earth the equipment. 

The pump is earthed through the earth cable of 

the supply. 

The gun is earthed through the high pressure 

flexible hose.  

All the conductors near the work area must be 

earthed.

Avoid approaching too much to the pump piston 
rod when the pump is working or under pressure. 
A sudden movement of the piston rod can cause 
wounds or finger squashing.

Never spray over flammable products or solvents 
in closed places.

Never use the tooling in presence of potentially 
explosive gas.

Always check that the product is compatible with 
the materials composing the equipment (

pump, 

spray gun, flexible hose and accessories

) with 

which it can come into contact. Never use paints 
or solvents containing Halogen Hydrocarbons 
(

as the Methylene Chloride

). If these products 

come into contact with aluminium parts can 
provoke dangerous chemical reactions with risk 
of corrosion and explosion.

If the product to be used is toxic, avoid inhalation 
and contact by using protection gloves, goggles 
and proper face shields.

Take proper safety measures for the protection 
of hearing in case of work near the plant.

  REPLACE THE PARTS DAMAGED OR WORN.

•    (IF  PROVIDED) 

TIGHTEN AND CHECK ALL THE FITTINGS 

FOR CONNECTION BETWEEN PUMP, FLEXIBLE HOSE AND 
SPRAY GUN BEFORE USING THE EQUIPMENT.       

•   ALWAYS  USE  THE  FLEXIBLE  HOSE  SUPPLIED  WITH 

STANDARD KIT. 

•   THE USE OF ANY ACCESSORIES OR TOOLING OTHER THAN 

THOSE RECOMMENDED IN THIS MANUAL, MAY CAUSE 
DAMAGE OR INJURE THE OPERATOR.

•   THE FLUID CONTAINED IN THE FLEXIBLE HOSE CAN BE VERY 

DANGEROUS. HANDLE THE FLEXIBLE HOSE CAREFULLY. DO 
NOT PULL THE FLEXIBLE HOSE TO MOVE THE EQUIPMENT. 
NEVER USE A DAMAGED OR A REPAIRED FLEXIBLE HOSE. 

The 

P31 2:1

 pump can be used in various ways depending on 

the model and conditions of use. Two application examples of 

the 

P31 2:1

 pump are shown below.

TYPICAL INSTALLATION

Summary of Contents for Larius 3700



















Reviews: