O60
O58
O56
O57
O61
O62
O53
O54
O55
O53
O56
O68
O63
O64
O65
O66
O59
O67
O66
O69
• Insert the springs
(
O54
)
and the valves
(
O55
)
into the seat
(
O53
). Position the seat on the pump support and lay the
manifold
(
O56
) on the seat
[do not forget the gasket
(
O57
)].
• Fasten the manifold with screws
(do not tighten)
ensuring it
is perfectly parallel to the other manifold and the distance
between them is 46 mm
(see illustration)
.
The distance between the walls of the manifold and the
edge of the seat must be about 0,8 mm.
• Rub the rollers
(
O58
)
and the pins
(
O59
)
with vaseline
grease and insert them into the mount
(
O60
).
• Rub the rubber pad
(
O61
)
and the washer
(
O62
)
with va-
seline grease and insert them into the mount
(
O60
).
• Grease the roller pushing pistons
(
O63
), the spring guide
rods (
O64
), the springs
(
O65
)
and insert them into the
mount
(
O60
).
• fasten without tightening the ring nuts
(
O66
)
on the mount
(
O60
).
• Fasten the mount on the manifolds and tighten the screws
(
O68
)
[do not forget of washer
(
O67
)].
• Tighten the ring nuts
(
O66
)
and the screws
(
O69
).
• Assemble again the covering and all the fittings of the air
supply line.
www.larius.com
15
SUPER Nova 45:1 - 68:1 - 80:1
ED. 13 - 10/2020 - Cod. 150157
