O52
O48
O43
O41
O42
O40
O39
O47
O46
O45
O44
O51
O50
O49
O44
Check gas ring
• Check the gas ring inside the support (
O39
) is undamaged.
• Check the gasket (
O40
) is undamaged and correctly po-
sitioned.
• Coat the inner walls of the cylinder
(
O41
) with a thin layer
of vaseline grease.
• Insert the motor piston
(
O42
)
into the cylinder
(
O41
) care-
fully.
• Fasten the cylinder
(
O41
)
on the support
(
N39
)
(respect the
position)
and at the same time insert the piston rod into
the support.
• Turn clockwise the screws
(
O43
).
• Insert into the motor rod
(
O44
)
the washer
(
O45
).
•
Carefully insert
the rod guiding screw
(
O46
) into the motor
rod
(turn it slowly following the direction of the thread)
and
screw it on the cylinder
(
O41
).
• Insert the rubber pad
(
O47
)
and the washer (
O48
) into the
support.
• Screw the bush
(
O49
)
on the motor rod
(
O44
). Insert the
seat (
O50
), the washer
(
O51
)
and screw the lock nut
(
O52
).
Adjust bush and lock nut so as the rod (O44)
just out of about 1 mm from the lock nut
(see
illustration)
.
www.larius.com
14
SUPER Nova 45:1 - 68:1 - 80:1
ED. 13 - 10/2020 - Cod. 150157
