4
853 802 R. 03/23
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
2023_03_01-11:00
EN
Compressed air powered reciprocating piston pump. This high capacity
demand pump is compatible with mineral and synthetic oils and
suitable for large installations with long length piping supplying several
fluid outlets simultaneously.
This pump can be mounted on the wall, with wall mounting bracket
(Part. No. 360132).
INSTALLATION
This pump can be mounted directly on the wall,
using the
bracket (360132). Firmly fix the bracket to the wall. Put the pump on it
and fix with included screws (Fig. 1).
In those cases in which it is required to comply with ATEX conditions,
be sure to ground the pump with the cable equipped with
a clamp (534907).
TYPICAL INSTALLATION
Please see figure 2, a typical installation shown with all the recommended
accesories for the pump to operate correctly.
NOTE:
The compressed air supply must be between 2 to 12 bar (40 to
180 psi), and 6 bar (80 psi) is ideal.
Fig. 2
POS. DESCRIPTION
PART NO.
A
Ball Valve,
Low Pressure
239004
B
Filter/Regulator
241001
C
Air hose
362100
D
Quick coupling
251412
E
Connection nipple
255312
F
Pump
536330
G
Pressure Relief Valve
609008
H
Oil hose
362303
I
Ball Valve, Medium Pressure
950303
J
Wall bracket
360132
K
Oil suction hose
367003
L
Ball Valve, Low Pressure
950306
Fig. 1
B
A
This pump is self–priming. To prime it the first time, you must connect
the air supply to the pump and slowly increase the air pressure from 0
to the desired pressure using a pressure regulator.
The pump starts to pump when an outlet valve is opened, for example
an oil control gun.
OPERATION
DESCRIPTION
360132
534907