2023_03_15-11:00
7
R. 03/23 896 854
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
EN
Maximum flow rate
30 l/min 7.9 gpm
Maximum working pressure
50 bar (725 psi)
Operating temperature range
-10ºC to 50ºC (14 ºF to 122 ºF)
Burst pressure
150 bar (2175 psi)
Fluid inlet
1/2” BSP
Fluid outlet
1/2” BSP flange with seal housing
Wetted parts
PP, Acetal, FPM, Stainless steel, PA
Fluid compatibility
Urea, Winshield washer fluid, Glycol, Antifreeze,
Distilled water, Brake fluid...
Weight
284 g (0.63 lb)
TROUBLE-SHOOTING
PROBLEM
CAUSE
SOLUTION
Slow flow.
Filter clogged, if it is installed (optional).
Clean or replace the filter.
Pump pressure is low.
Increase pump air pressure.
Fluid supply
does not stop
Valve seal worn or damaged.
Disassemble the valve for inspection. If it is
not damaged, clean seat valve. Otherwise,
replace the valve.
Foreign material on valve seal.
Leakage at piston.
O-ring worn or damaged.
Replace o-ring according to instructions.
Leakage at swivel.
The swivel is loose.
Tighten swivel assembly.
Swivel o-ring worn or damaged.
Replace o-ring.
TECHNICAL SPECIFICATIONS
84 mm
(3.3 in)
55 mm
(2.1 in)
204 mm
(8 in)
SPARE PARTS KITS
See pages 26 and 27.
