background image

 

ENGLISH 

 

12

When this happens : 

A)  Let go the plate if you are holding it. 
B)  If the message continue, turn off the scale and turn it on again. 

 

HOW TO USE THE "REFERENCE TO ZERO" 

 

It is possible for the scale to show a number in the display without having any product on the plate 
due to voltage variations, rough handling, or some other factor. When this happens, simply press 
the 

 key and the view finder will return to "zero". The word "zero" will appear in the display. This 

operation is commonly known as "resetting to zero". 

 

HOW TO USE THE 

 KEY 

 
When you do not have enough light you can use the backlight to improve the readability of the data 
on display. To turn on and turn off the backlight just press the 

 key. 

 

HOW TO USE ALARM FUNCTION 

 
Press the 

 key, it’ll be display “hi lmt?” In the display 

 

 

 

Then press 

 

or 

 keys for set high alarm limit. 

 

 

 

Press 

 key for increment or 

 key for decrement value, if key still pressed the increment / 

decrement will be faster. For save high alarm value and go to adjust low alarm value press 

. I’ll 

be display “lo lmt?” In the display. 

 

 

 

Then press 

 

or 

 keys for set low alarm limit. 

 

 

 

 Key for increment or 

 key for decrement value, if key still pressed the increment / 

decrement will be faster]. For save low alarm value press 

. The scale it’ll be ready to weight. 

Note: for disable alarm, make the same procedure but set high and low alarm to zero (0.000) 

 

HOW TO DISPLAY ALARM LIMITS 

 

Press 

 

or 

 key for display high or low alarm limit. For exit press 

 . 

 

Summary of Contents for L-EQ Series




















Reviews: