background image

 

ENGLISH   

 17 

  

 

IX.-MAINTENANCE AND CLEANING / MANTENIMIENTO Y LIMPIEZA 

 

 

One of the greatest advantages of purchasing this scale model is that it requires minimum 
maintenance and it is very simple to keep it in favorable conditions. 

 

 

Do not use a flow of water to clean your scale. Use a damp rag and clean each of this 
components daily:  plate, turret,and keyboard. 

 

 

To remove oil and greasy substances, use a dry and clean rag, rubbing the dirty area several 

times. 

 

 

Do not use detergents or corrosive liquids while cleaning. 

 

 

Do not place the scale where there is a lot of moisture and/or dust. 

 

 

When you clean the scale make sure that there are not any papers, pieces of meat or any other 

kind of material under the plate or under the plate-holder that could obstruct the adequate 
operation of your scale. 

 

 

Periodically check the jack (where the ac/dc power supply is inserted) to make sure it is in good 

condition.  

 

 

Periodically check the ac/dc power supply to make sure the ends are in good condition and that 

the cable is not twisted or tangled. 

 

Regularly check the scale to assure it is correctly leveled,  that the four leveling bases had being 

well supported. 

 

 

Do not expose your scale to temperatures below -10 ºc (14 ºf) or above 40 ºc (104 ºf). 

 

 

Never press the keyboard with objects such as pencils, pens, knives, etc. 

 

 

Do not drop hard the product to be weighted on the plate of the scale because with the time it 

could damage the load cell. 

 

Summary of Contents for L-EQ Series




















Reviews: