5
ENGLISH
READ these instructions carefully before installing and operating the oven.
Keep them for further reference.
Record in the space below the SERIAL NO. found on the nameplate on your
oven and retain this information for future reference.
SERIAL NO
:
PART NAMES
1.
Door Safety Lock System
2.
Oven Window
3.
Oven Air Vent
4.
Shaft
5.
Roller Ring
6.
Glass Tray
7.
Control Panel
8.
Heater (mod. HMG)
9.
Grill (mod. HMG)
10.
Open door pushbutton
CONTROL PANEL
The control panel comprises two elements: one is a timer, the second a
power level selector.
OPERATION SELECTOR
It permits choosing the mode of operation or power level. This is the first
setting to program before turning on the oven.
TIMER
This serves to set and view the cooking time within a range of up to 30
minutes per cycle.
GRILL
To use the grill, turn the operation selector past the highest power level.
MICROWAVE COOKING
For microwave cooking, five power levels are provided for you to choose
the most suitable one.
Power levels are defined as follows:
INSTALLATION
1. Make sure that all the packing materials are removed from the inside of the
door.
2. Check the oven for any damage, such as misaligned or bent door, damaged
door seals and sealing surface, broken or loose door hinges and latches and
dents inside the cavity or on the door. If there is any damage, do not opera-
te the oven and contact a qualified service personnel.
3. This microwave oven must be placed on a flat, stable surface to hold its
weight and the heaviest food likely to be cooked in the oven.
4. Do not place the oven where heat, moisture or high humidity are generated,
or near combustible materials.
5. For correct operation, the oven must have sufficient airflow. Allow 20cm of
space above the oven, 10cm at back and 5cm at both sides. Do not cover or
block any openings on the appliance. Do not remove feet.
6. Do not operate the oven without glass tray, roller support, and shaft in their
proper positions.
7. Make sure that the power supply cord is undamaged and does not run under
the oven or over any hot or sharp surface.
8. The socket must be readily accessible so that it can be easily unplugged in
an emergency.
Loading
Description
1
100%
HIGH
2
85%
MED.-HIGH
3
66%
MED.
4
40%
DESFROST
5
17%
LOW
