Sammic AX-40, User Manual

Page: 4 / 48

Active AX | Installation
4 User’s manual — 2900453/0
• Airborne noise :
– For a standard machine, the noise emitted by the machine is
69 dB(A) (distance 1 m).
Safety warnings in the manual
Other warnings in the manual
2 Installation
2.1 Supply scope
• Documentation:
– User manual.
– Warranty card and Declaration of Conformity.
– List of spare parts.
– Electrical circuit diagram.
• Machine
• Power supply cable
• Drain hose
2.2 Prerequisites and preparation for
installation
Tools and material required for installation
• Included in the supply:
– Power supply cable
– Drain hose
• Not included for mechanical assembly:
– Flat screwdriver
– No. 10 box spanner
– Universal pliers
– Clamp
– Pressure gauge
• Not included for electrical assembly:
– Power strip and/or European plug type "F" or three-phase plug
(depending on the installation)
– Electrical tester
Space required for installation
• Check that the water line is less than 1.50 m from the intended
location of the machine.
Electrical connections
Before installation, take note of the power input required by the
machine. [ ▶ 6 Technical specifications p. 11 ].
Fig. 1: Machine connection points
Preparation for installation
1) Check that the installation area is flat and stable.
2) Check that the water line has a ¾" GAS shut-off valve at the end
closest to the machine.
⚠
Warning
“Warning” safety warnings could result in severe, irreversible
personal injuries or death.
⚠
Caution
“Caution” safety warnings could result in severe, reversible per -
sonal injuries.
Notice
“Notice” warnings could result in damage to the machine.
ℹ
Information
The tables of “Information” contain advice on how to use the
machine correctly and efficiently.
ℹ
Information
Figure with machine dimensions: see appendix at the end of the
manual.
A
Drain pipe ⌀ 30 mm AX50: models
without drain pump]
B Water inlet ¾" GAS
A’
Drain pipe ⌀ 30 mm AX50: models
with drain pump]
C Connection cable
A B
AX 40
C
A A' B C
AX 50
A B C
AX 100