20 | SAMLEX AMERICA INC.
SAMLEX AMERICA INC. | 21
Figure 1 - layout of power Supply module
leGeND
S1 to S4 holes for 4 Screws to fasten the Module to the Chassis
S5 & S6 holes for 2 Screw to Connect to the Positive and Negative output Bus Bars
l & n
L ( Line ) And N ( Neutral ) Terminals for 120V, 60 hz Input Power Supply wires
led 1
Terminal for “oN“ Status for opto-Isolated Remote Indication LED 2 Terminal for
“LED“ PSM Status for front Panel Indication Jump 1, Jumper Terminal for Connecting
Share Bus wire
F1
fuse
VR1
Potentiometer for output Voltage Adjustment
Figure 2. “daisy chaining“ of “Share bus“ Jumpers (Jump 1)
PSM 1
PSM 2
PSM 3
PSM 4
PSM 5
PCB ( printed circuit board )
Jump 1
jump 1
jump 1
jump 1
jump 1
1. female socket terminal of the daisy chain.
2. Male 2 pin terminal marked “jump 1“ on the power supply module.
SeCtION 15 |
appendix – Figures 1 to 3
1
1
1
1
1
2 2 2 2 2
S1
S2
LED1
LED2
VR1
JuMP1
f1
NoT To SCALE
S-6
S4
S3
S-5
L
N
