Warning!
Exclamation mark ! indicates fundamental
safety measures to be observed when using
electrical equipment to avoid the danger of:
- electric shocks
- fire
- injury
General Safety and Installation Information
PLEASE READ THIS MANUAL BEFORE OPERATING
THIS INVERTER!
Do not connect the output to other power sources!
The inverter must only be used for the purpose specified by the manufacturer!
When working on the inverter, always disconnect it from the mains!
A failure of the protective device means that danger is still possible from parts which remain
under voltage during repair!
Do not operate the inverter if housing or cables are damaged!
Do not expose the inverter to direct sunlight in order to avoid additional heating!
The inverter must be positioned and fixed in such a way that it cannot fall over or fall down!
The inverter must be kept in a safe place out of the reach of children!
The inverter must not be operated in a damp or wet environment!
Air intake and outlets must not be blocked!
Ensure good ventilation!
Do not operate without connecting to ground. Shock may result!
1.2 Cables:
•
If cables have to be inserted through metal walls or other sharp-edged materials, use a cable
duct or cable bushing!
Do not lay cables loosely or in sharp bends in electrically conductive materials!
Do not pull the cables!
Do not lay 115/230 VAC mains cable and 12/24 V DC cable together in the same cable duct!
The specified minimum cable cross-section must be complied with!
Fix cables properly!
Lay cables in such a way that no one can trip over them!
Lay cables in such a way that they are not exposed to the risk of damage!
1.1 About the unit itself:
1.3 Installation on Boats:
Wrong installation of electrical units on a boat may lead to corrosion of the boat. Therefore,
please let a boat electrician carry out the installation of the inverter.
Page 3
Summary of Contents for PST-60S-24A
Page 15: ...Attach Receipt Page 15...
