Samlexpower PSE-12125A, Owner'S Manual

Page: 46 / 52

46 | SAMLEX AMERICA INC.
seCtIOn 13 | specifications
PARAMeteR
PSe-12125A PSe-12175A PSe-12275A
oUtPUt
ouTPuT VolTAgE 5% / - 10%
ouTPuT frEQuEncy 60hz ± 5% 60hz ± 5% 60hz ± 5%
ouTPuT VolTAgE wAVEforM Modified Sine wave
MAXIMuM conTInuouS AcTIVE
PowEr ouTPuT (PowEr
fAcTor = 1)
1250 w* 1750w* 2750w*
MAXIMuM AcTIVE SurgE
PowEr ouTPuT (< 2 SEc, PowEr
fAcTor =1)
2500w* 3500w* 4500w*
PEAk EffIcIEncy 85% to 90% 85% to 90% 85% to 90%
inPUt
dc InPuT VolTAgE 12V battery System (> 10.5Vdc to < 16.5Vdc)
MAXIMuM dc InPuT currEnT < 175A < 280A < 360A
no loAd currEnT drAw 320mA 370mA 600mA
MonitoRinG AnD inDicAtionS
dc InPuT VolTAgE, VolTS colored, 10 level lEd bar graph
dc InPuT currEnT, AMPS
And ASSocIATEd ouTPuT
PowEr, wATTS
colored, 10 level lEd bar graph
oVEr TEMPErATurE red lEd + buzzer Alarm
oVErloAd red lEd red lEd red lEd
low dc InPuT VolTAgE buzzer Alarm buzzer Alarm buzzer Alarm
PRotectionS
coolIng Temperature controlled fan
oVEr loAd / ShorT cIrcuIT • Shutdown if output power > Continuous /
Surge ratings
• Manual Reset: Switch OFF, wait for 3 min and
Switch on
oVEr TEMPErATurE • Shut Down when temperature of internal hot
spot > threshold
• Automatic reset when unit cools down
hIgh dc InPuT VolTAgE • Shut down when DC Input Voltage >16.5VDC
• Auto reset when voltage drops below 16.5VDC
low dc InPuT VolTAgE • Shut down when DC Input Voltage < 10VDC
• Auto reset when voltage rises to > 11.3VDC
low dc InPuT VolTAgE AlArM • Buzzer alarm when DC Input Voltage < 10.5VDC
• Auto reset when voltage rises > 10.5VDC