Sames Inocoat Inogun M, Instruction Manual

Page: 27 / 69

27
DRT7132
D - 2022 /09
Member of Exel group
6.4.2. Procedure B2: Replacement of trigger
• Using a pin punch D: 1.8 mm, pull the trigger pin out of
the trigger in the handle.
Remove the trigger.
Be careful not to lose the spring.
• Replacing the trigger: The pin (C) must be correctly
centered,
1 Place the spring (A) around the magnet (B).
2 Place the trigger in its housing as shown.
3 Insert the pin (C).
B
C
A