9
DRT7145
C - 2022/11
Member of Exel group
This equipment may be hazardous if it is not used, disassembled and reassembled in
accordance with the rules indicated in this manual and in any applicable European Standard or
national safety regulations.:
• The
Inobox
control module must not be installed outdoors.
• The keyboard of the Inobox control module must be protected against high mechanical shocks (EN 60079-0
§26.4.2).
• The control module must not be exposed to UV light. If it is exposed to UV light, the front panel must be
protected. For mounting on the cart or for wall support, the rear panel is protected by a metal cap and a plastic
protection of the connectors. In the case of cabinet mounting, no exposure is possible.
• The ambient temperature around the
Inobox
control module must be no greater than 40°C.
• The
Inobox
module must not be altered from its original condition.
• Only
Sames
spare parts, or a repair performed by the
Sames
repair department, are able to ensure and
guarantee the operational safety of the
Inobox
module.
• Turn off the electrical power supply to the
Inobox
module before disconnecting the connectors from the
module.
• Any repairs on the
Inobox
module with the power supply still on can only be performed by personnel certified
and trained for electrical repairs.
• It is imperative to start the installation with the earthing of the module. If the module is de-wired, the earth
connection must be disconnected last.
•
For a safety shutdown of the module it is necessary to switch off the module,
this requires disconnecting the power supply cable.
• The control modules are an integral part of the spraying system and must therefore be integrated into the
safety system of the powder coating installation.
•
Inobox
control modules can be installed:
1
On an Inocart cart:
The control modules are delivered mounted and wired on the cart.
They are fixed on a support with 4 screws and washers (refer to the user manuals for carts 7159 or 7161).
2
On a wall support:
The wall support is installed on the wall of a spray booth or on a wall. The control module
is secured using the screws and bolts supplied with the wall bracket kit (refer to the specific user manual).
3
In an Inomaster cabinet:
Installed on a rack that can hold up to 8 control modules (refer to the specific user
manual).
Two inviolability labels are present on the top of the Inobox. Any damage or absence of these
labels will result in the loss of the Sames manufacturer's guarantee.
GUARANTEE
VOID IF SEAL
BROKEN