Sames Inocoat Inobox, Instruction Manual, Page: 19 / 84

19
DRT7145
C - 2022/11
Member of Exel group
5.1.3. Screen 1: Custom mode screen
This screen allows to enter the setvalues for using the custom mode different from the 3 previous modes (Simple,
Complex and Over-powder coating).
Press the key to access the submenu of the selected mode.
Area Description
1 Custom mode
2
Program selection: 99 custom programs can be set in voltage, current, injection air and powder flow
( see § 5.1.2 page 18 ). The blowing and fluidization values can also be set for each program.
These values can be found on the 2/2 screen.
The and keys are used to change programs
3
Powder flow rate and conveying air settings for each program.
4
Voltage and current settings for each program.
Flashing: Spraying in progress with voltage at the output
5 If both keys are pressed simultaneously, direct access to the parameter setting screen ( see § 5.1.5 page 21 )
DES07385
P
3
1
Inobox
20 65
kV µ A % %
0 0
INOGUN M V : XXXX
1
5
2
3 4