Revision index: E - May 14
th
, 1998
- 7 -
Code : RT 6015
2. INSTALLATION
2.1. SAFETY RULES
IMPORTANT NOTE ...........This spray gun is only for use with powder paints.
Use of the powder spray gun must comply with the safety precautions specified in this manual (refer to articles R233-140
to R233-150 of the Code of Labour Law on paint booths and powdering).
1. The spray gun should only be used by trained personnel who are fully aware of the safety rules specified in this
section.
2. Powder spraying must be conducted in a specially designed and correctly ventilated booth. The logic control system
must link the extractor fan system and the spraying equipment in such a way as to ensure that spraying is only possible
when the extractor fan system is running.
3. All conducting material located in the proximity of the spray gun (including, in particular, the parts being painted)
must be connected to the earth associated with the electrical power supply.
4. The electrical resistance of all parts for painting, in relation to the earth must be less than or equal to 1 M
Ω
.
5. The spraying equipment must be regularly maintained, in line with the instructions in the manual. Any repair work
must fully comply with the guidelines provided by the manufacturer of the material.
6. The high voltage current power supply must be turned off before starting to clean the spray guns.
2.2. INSTALLING THE EQUIPMENT
Care should be taken to ensure that the equipment is installed in compliance with the safety rules specified in section 2.1.