Revision index: E - May 14
th
, 1998
- 17 -
Code : RT 6015
BF04-B - DISMANTLING AND RE-ASSEMBLY OF THE SRV 028 SPRAY GUN
1 - DISMANTLING
- It is assumed that the spray gun has already been removed.
- Loosen the nozzle nut (39).
- Dismantle the nozzle (33).
- Loosen the screw (36) and remove the contact washer (38).
- Remove the O-ring (30).
- Dismantle the 90° powder feed pipe nozzle (28), then remove the O-ring (29).
2 - RE-ASSEMBLY
- Check condition of the O-rings (29), (30) and (31) and of the brass screw (36). Replace if necessary.
- Install the O-ring (29). Install the 90° powder feed pipe nozzle (28).
- Install the O-ring (30).
- Install the contact washer (38) in the gun body (27) and secure with the brass screw (36).
- Install the nozzle (33) in the nozzle nut (39). Tighten on the gun body (27).
- Install the gun assy on the HV unit connecting part. Make sure the O-ring (31) and the resistor holder (32) are present.
- Fasten the gun using the screws (34) and (35).
34
35
28
29
31
32
30
38
33
36
39
27