Safety instructions
582118110-EN-indG-Regulator-PaintCare-BPR-L.docx
17
Products implemented
Given the diversity of the products implemented by the users and the
impossibility of listing all the characteristics of the chemical
substances, their interactions and their evolution over time
SAMES
KREMLIN
and the manufacturer can not be held responsible:
The poor compatibility of materials in contact.
Inherent risks to staff and the environment.
Wear and tear, maladjustment, malfunction of equipment
or machines and the quality of the finished product.
In the event of a diaphragm rupture, a large area of the
environment may be contaminated with the pumped
medium.
The back pressure regulator,should only be used in environments that
do not alter the properties of the products used in a negative way.
Checking the compatibility of materials is the responsibility of the user.
The user will have to identify and prevent the potential dangers
inherent to the implemented products such as:
Toxic vapors.
Fire.
Explosions.
It will determine the risks of immediate reactions or due to repeated
exposures to the staff.
SAMES KREMLIN
and the manufacturer decline any responsibility, in
case of:
Bodily or psychic injuries.
Direct or indirect material damage due to the use of
chemical substances.
The following points must be observed if the hazard analysis
conducted by the operator reveals that a possible leakage of the
medium poses an increased risk :
The installation of media shut-off valves at the medium inlets
and outlets to shut off the medium flow in case of a leakage
on the
back pressure regulator
.
If
diaphragms
are completely defective, the medium to be
pumped
can react with materials in the compressed air
circuit. The operator must evaluate the risk before taking it
into operation and take appropriate measures.