Safety instructions
582118110-EN-indG-Regulator-PaintCare-BPR-L.docx
10
Security devices
CAUTION
Guards (motor cover, coupling guard, housings, ...) are set
up for safe use of the equipment.
The manufacturer can not be held responsible for any bodily
injury as well as failures and / or damage to the equipment
resulting from the destruction, the occultation or the total or
partial removal of the protectors.
Never exceed the maximum working pressures of the
equipment components.
Danger to personnel and to the equipment
Observe all safety and hazard warnings on the equipment
and keep them in a complete and legible condition
Observe all general and special safety instructions in this
Operating Manual and the operating instructions of third
party manufacturers.
Refrain from any unsafe working method.
Keep the Operating Manual on hand at all times.
Shut down the media supply system immediately and notify
the responsible department or person when safety-relevant
modifications have been made or the operational
behaviour of the equipment changes.
Shut down the media supply system immediately and notify
the responsible department or person when safety
installations are damaged, defective or have been
modified.
Follow the applicable regulations for safety at work and
health protection (DGUV regulations).
Do not remove or modify safety installations and warning
signs at the equipment.
Do not modify the equipment without authorisation.
The access to the equipment is not allowed for unauthorized
persons.
