Doc.-ID: 160319-PT08BA-TG-ExCam IPQ1775 series_en_rev.01.docx, Seite 12 von 40
Agent 28), VMQ (silicone), polyester
(acetone resistant), titan (Ti
22
)
Sight glass material:
Borosilicate glass (Ilmadur 10/ I-420)
Additional internal materials:
Aluminum die cast, zinced (protection housing
of the camera module), polyamid isolatores,
mounting adapter made of aluminum (AlMgSi),
zinced steel metal sheet, plastics, PUR etc.
Weight (without accessories):
7100 g
(with „K1“ cable gland flange)
8200 g
(with „K2“ cable gland flange)
Weight accessories:
1600 g (wall mount bracket and hood)
Dimensions housing (BxHxT)
5
:
113.0 mm x 138.5 mm x 260.2 mm (K1 flange)
113.0 mm x 138.5 mm x 276.0 mm (K2 flange)
Dimensions with accessories (wxhxd)
6
: 135.0 mm x 238.0 mm x 413.0 mm
Fitting of the flame proof gap preventing the transmission of ignition (cylinder) (EX)
T07 VA2.2:
Nominal diameter: 91 mm
Clearance fit: H8 f7 (DIN ISO 286)
Tolerance: -71µ
m…+54µm
Gap length: > 12.5 mm
Gap width: < 0.15 mm
Average surface finish: R
a
≤
6.3
μ
m
Media resistance
7
(excerpt):
Acetone, alcohol, acetylene, ammoniac, aniline,
benzol, butane, chloride, pressurized water,
pressurized air, ethane, crude oil, fluoride,
glycerin, sea water, methane, oils, phosphoric
acid, propane etc.
5
Dimension stainless steel housing T07 VA2.2 with pin and without cable gland and external accessories. For additional / detailed
dimensions see chapter 10
– technical drawings
6
Dimensions camera housing T07 VA2.2 with wall mount bracket and roof (pointing forward)
7
Additional media resistance as well as well as validation of chemical resistances possible upon request
