2. Removal of the belt clip
As for the removal of the belt clip, please refer to the installation
steps and loose the screws in conterclockwise.
Installation/Removal of External Earphone or
Microphone
1. Installation of the external earphone or
microphone
Specifications and Parameters
General Specifications
Channel capacity 16 groups of memory channels
CTCSS 50 QT
CDCSS 105 DQT
Frequency stability ±2.5PPM
Antenna Impedance(Ω) 50Ω
Operating Temperature
-20
~ +50
Power supply(V)
Battery type
7.4V DC
Li-Polymer1300 mAh
Features
■
Voice cmpander/scrambler
18
(1) Unclose the earphone cap (without removing) in the direction of
the arrow
①
.
(2) Insert the earphone or microphone
③
as shown above.
2. Removal of the external earphone or microphone
You can pull out the external earphone or microphone to remove it.
Note:
The use of an external earphone or microphone will affect the
waterproof performance of the transceiver.
■
Power saving /Low Battery
Alert
■
Channel Scan/ Priority Scan
■
Selectable Power H/L
■
Busy channel lockout
■
Time out timer
■
VOX: Sensitive and delay settings
■
Squelch tail elimination
11
