Products Inspection
Welcome to use FPBN10A transceiver, and before using, we
recommend you:
Please open the giftbox carefully to confrim whether the items as
following table are all included; if you find any things lost or damaged,
please contact immediately with the dealer.
Standard Accessories
Installation /Removal of Antenna
1. Installation of the antenna
⑴
Plug the screw-thread end of the anenna
into the socket at the top of the transceiver.
⑵
Rotate the antenna clockwise until tightening
up , as shown below.
Items
Transceiver
Antenna
Li-polymer battery
Numbers
1
1
1
Battery charger
Adapter
Belt clip
1
1
1
2. Removal of the antenna
Rotate the antenna counterclockwise to remove it.
12
Screws for belt clip 2
Hand Strape 1
User manual 1
Note:
Please refer to the color-ring label at the bottom of the
antenna for the antenna frequency band. If the label does not
indicate frequency band, you can turn to the label on the body
of the transceiver.
Installation /Removal of Belt clip
1.Installation of the belt clip
First remove the battery, and then place the clip on the rear top of
the
machine, and fix it with two screws
①
by a cross-screw.
Note:
Do not install the belt
clip unless the battery is off.
17
