Operator's Manual
Round bale wrapper
Spin S, Spin F
- 36 -
15. WARRANTY CONDITIONS
15.1. Warranty claims procedures
1.
The manufacturer provides a bale wrapping machine designed and built in compliance with
the currently applicable standards. The manufacturer guarantees that the supplied bale
wrapping machine is free of manufacturing defects.
2.
The manufacturer provides warranty service for 12 months starting from the date of first sale,
provided the wrapping machine is used for its intended purpose and the recommendations
contained in the manual are followed.
3.
The warranty card properly filled in at the Dealership is the confirmation of the manufacturer‘s
warranty; the acceptance of the warranty conditions must be confirmed by the customer‘s
signature.
4.
The quality warranty covers the machine‘s defects caused by defective manufacturing,
material defects and latent defects.
5.
The warranty does not cover the assemblies and parts which are subject to normal wear (e.g.
tyres, brake pads).
6.
The warranty does not cover any mechanical damage or other damage resulting from improper
use, improper maintenance or improper adjustment of the wrapping machine.
7.
The warranty does not cover any damage resulting from improper storage of the machine.
8.
Any unauthorised modifications in the construction of the machine introduced by the user will
result in automatic termination of the warranty.
9.
The manufacturer shall not be held responsible for any loss, damage or destruction of the
product resulting from causes other than defects of the supplied machine.
10.
During the warranty period the manufacturer will repair any defects which occurred as a result
of the manufacturer‘s negligence with the exception of defects listed in paragraphs 5 - 8.
11.
The warranty repair shall be made within 14 working days of the notification/ supply of the
machine to the designated service station or at other time agreed upon by the parties.
12.
The warranty is extended by the time required to complete the repair.
13.
During the warranty period all repairs which are not covered by the warranty are performed by
the authorized service stations at full cost to the user. Before such repairs, the service station
will inform the user of the suggested cost, time and scope of the repair.
14.
The decision whether to commence a chargeable repair of the wrapping machine with
a warranty valid at the time of repair is made by the Customer.
NOTE:
Upon the purchase of machine, request the vendor to carefully complete the
warranty card. Date and place of the purchase as well as vendor stamp and
signature is needed, otherwise may lead to the warranty loss.
NOTE:
Exact address, date and place of purchase, together with invoice number is
needed for warranty claim to be processed.
NOTE:
Manufacturer reserves the right to change the specification or design of
products without notice.