Operating manual
Tractor mounted snow plow
Smart (K), Lite 150, Uni
-
16
-
After correctly mounting the plow on the tractor it should be inspected and it should be
determined if the plow has a worn blade insert or loose bolts. If necessary replace worn elements
and tighten the bolts. If the plow is ready for use it should be placed in the desired position and
plowing may be started.
Fig. 13
presents basic operating positions of the plow. While working on
public roads turn on the marker lights.
Fig. 13.
Basic operating positions of the plow, a) plowing snow left, b) plowing snow right,
c) moving the snow
5.1.1
Blade rake-angle adjustment (for Uni plows)
Uni plows have possibility of adjusting blade inclination angle by 7° within range from 0°
up to 21°. In order to provide adjustment tighten bolts (
A
) (
Fig. 14
) next put these into
corresponding holes. Putting bolts into holes, which are located nearer the blade, will increase the
blade rake-angle.
WARNING!
As for plow optionally equipped with support wheels pay attention to
their proper setting in relation to blade rake-angle.
a)
b)
c)
