
Instrukcja obsługi
Operator's manual
Lightweight, rear disc mowers
SAMBA
- 34 -
9.
REPAIR AND WITHDRAWAL FROM USE
9.1. Repair
WARNING!
Before repair and disassembly the mower should be disconnected from the
tractor.
WARNING!
It is forbidden to make any repairs under farming machine, or its individual
components, which is lifted and unprotected against a free fall.
Prior to any repair or service works the mower should be cleaned thoroughly and any grass, dirt
or mud removed.
When repairing the machine, protect it against losing its stability, which in result may crush the
operator, so place the mower on a stable ground and protect its location by means of a protected
support leg.
After checking nuts and bolts, proper slack in joints, gears we can assess if the machine is still
serviceable
.
Carefully check nuts and bolts for adequate torque and the pins for wear. Replace screws,
pegs, v-belts, pins, bushings, disks, knives, knife holders, bearings etc. with new ones if necessary.
Once the machine is repaired perform the following
:
❑
make sure that all elements are installed properly,
❑
install the removed guards,
❑
check that all screws and nuts are tightened,
❑
check for proper clearance on pins and gears,
❑
once all the guards are installed, perform a warm-up start to make sure the repaired machine
operates properly.
9.2. Disassembly and withdrawal from use
If the mower cannot be repaired anymore, it should be withdrawn from use. For this purpose oil
from intersecting axis gear and the 3-point linkage frame should be drained and thoroughly clean any
excess oil with cleaning agent, take v-belts and any elements made of plastic. These should be
delivered to a proper waste treatment company.
Remaining metal parts should be sold to breaker's yard.
WARNING!
When unhitching the machine pay particular attention to additional threat such as
crush, cut, wound or concussion. Special protective equipment must be used:
gloves, protective clothing, glasses etc. Pay attention not to allow the machine
lose its stability and therefore protect it with supports.