SaMASZ SAMBA 160, Operator'S Manual

Page: 18 / 42

Instrukcja obsługi
Operator's manual
Lightweight, rear disc mowers
SAMBA
- 16 -
Fig. 6.
Location of warning decals on mower
NOTICE:
Any spare part used for repair of the mower should have all warning decals provided
by the manufacturer.
5. MOWER'S OPERATION
5.1. Mounting mower on tractor
WARNING!
When mounting and dismounting the mower, there should be no persons in
between the machine and the tractor. Any accidental maneuvering with the set
may cause to crushing of unauthorized personnel.
WARNING!
The machine should be mounted on a level ground.
The mower is connected to the
tractor’s 3
-point-linkage (
Fig. 7
):
❑
After the mower has been attached, adjust (on the fl
at ground) the mower’s position b
y means of
top S and lower W links.
❑
Lower links W should be connected to 3-point linkage frame pins A .
❑
The cutterbar should lean towards the driving direction.
❑
Support chain L
holds up mower’s linkage frame
.
❑
Connect hydr
aulic hose to tractor’s hydraulic
connector.
❑
Mount PTO shaft ( B ). If needed, shorten the shaft as in 5.2. Mounting PTO shaft.
N-01; N-02; N-03; N-04; N-05; N-06
N-07; N-23; N-48; N-49; N-50; N-117
N-167; N-168; N-224
N-14; N-15; N-63; N-162
N-155
N-49
N-32/ N-65
N-28/ N-29
N-40
N-40
N-109
N-52; N-100
N-101; N-102
N-103; N-104