Operator’s manual
Trailed tedder
P4-471 C P4-531 C P6-771 C
- 17 -
5.
OPERATION
WARNING!
Before beginning to use this machine, do the following:
•
Read manual, especially safety precautions in section 4.
•
Make sure you are familiar with all controls and functions.
•
Make sure all safety devices are in place and working. Fix or replace if not
working or damaged.
•
Replace protective cover if damaged.
5.1. Mounting tedder on tractor
5.1.1. Trailed 4 -rotary tedder
WARNING!
•
Only hitch and unhitch machine on a flat surface with compact dirt.
•
Keep everyone away from area between tedder and tractor.
•
Be careful near link road zone of tractor's rear power lift. Contains sharp
parts.
Mount the tedder on a tractor by means of tiller (
3
) and 3-point linkage beam (
1
) (
Fig. 10
),
being part of each tractor's standard equipment.
Secure the tiller and the beam with pin (
2
) and protect it with cotter.
Lift support leg up and secure it with split cotter,
Hydraulic hoses (
4
) for folding side arms and tiller's cylinder respectively should be connected
to two tractor's single-section hydraulic outlets.
Connect the machine's lighting cables to the tractor and check the lights for operation.
Connect telescopic articulated shaft. If need be shorten the shaft as per item 5.4.
Fig. 10.
Connecting the tedder to the tractor (for: P4-471C, P4-531C, P6-651C)
1
2
3
4
