Operator’s manual
Trailed tedder
P4-471 C P4-531 C P6-771 C
- 31 -
9.2. Disassembly and withdrawal from use
If the tedder cannot be repaired anymore, it should be withdrawn from use. Therefore oil from
the frame gearbox should be drained and thoroughly clean any excess oil with cleaning agent, take
parts made of plastic off. They should be used further on or delivered to a proper waste treatment
company. Upon completing the required activities the tedder should be sold to breaker's yard.
IMPORTANT:
When dismounting the machine pay particular attention to and additional
dangers, as crushing, cutting, wounding, concussion and abrasion. Use
proper tools and personal protective equipment: protective gloves, clothing
and footwear, eye wear, etc. Pay attention so that the machine works
efficiently, and thus it is required to secure the machine with supports.
10.
WARRANTY CARD
TRAILED TEDDER
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
NOTE:
A warranty card without the required information or with corrected or illegible
information –
is invalid.
11.
WARRANTY TERMS
11.1. Warranty claims procedures
1.
The manufacturer warrants good quality and defect-free operation of the tedder under this
warranty if the tedder is operated in accordance with the operator's manual
2.
Faults or damages to the machine found within 24-month period from the date of purchase shall
be removed free of charge at the purchaser’s or the manufacturer’s.
3.
Faults or damages should be submitted personally, in writing or by telephone. Repairs shall be
carried out within 14 days. Any repairs under the warranty should be carried out by authorized
SaMASZ service facilities.
4.
Warranty claims regarding the product replacement or repayment are considered within 14 days
by the manufacturer.
5.
The following conditions are not covered by warranty:
a)
wear and tear of parts such as: tine holders, tines, intersecting axis gears and parts
inside the gearboxes, bushings and sliding elements, joints, arms with tines, rubber-
metal fenders, tires, connective elements, etc. These repairs may be carried out only at
the purchaser cost.
b)
use of the machine for any purpose other than described in the operator's manual,
Serial number
Manufacture date
Warrantor’s stamp
Controller’s signature
Date of sale
Seller’s stamp
Seller’s signature
