Operator’s manual
Front flail mowers
NANO 150, NANO 150 H
- 17 -
Fig. 9.
Connecting return hose to the connector with pressure-less return line
WARNING!
If the vehicle has no hydraulic connector with pressure-less return line, refer to
the instruction manual, or consult the vehicle's manufacturer where pressure-
less return line can be connected to the tank.
WARNING!
Depending on the type of vehicle, with which the carrier is aggregated, it is
allowable to replace connectors or extend hydraulic hoses on the user's own.
WARNING!
Extending or using too thin hydraulic hoses for work head supply can lead to
overheating the pack, improper operation of the tooling attached or its
damage.
WARNING!
When connecting hydraulic hoses and electric cables to front loader's arms, in
machine rotation points, provide and leave some allowance, so that during the
operation they are not damaged.
5.1.2.
Connecting the NANO 150 flail mower to the vehicle
For hitch interchangeability, the mower can be mounted on various vehicle types. Ask
manufacturer or your dealer on hitch availability.
Mount the mower on the hitch of the target vehicle following instructions
of the manufacturer.
This
Fig. 10
shows manner in which the mower is mounted on vehicle Kubota F. To mount
the machine correctly use the corresponding adapter (
1
). Loader rod (
2
) is articulated to the adapter
(
1
) by means of pin (
3
) secured with cotter (
4
). Then set the correct inclination angle
of the adapter (
1
) using adjustment screws (
5
)
.
PRESSURE-LESS
RETURN LINE