Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 26 -
6.6.
Adjusting the space between tine conditioner’s mask and its shaft.
(Models: KDTC 260S and KDTC 300S)
Depending on size and thickness of the mowing grass, there may be a necessity to adjust the mask of
the conditioner. The higher and thicker grass, the bigger the space between conditioner’s mask and its
shaft should be. Proper adjustment should be based on the experience, in order not to block the
conditioner and not to activate the friction clutch of PTO shaft. The way how the mask is regulated is
shown in Fig. 19.
Fig. 19. Adjusting tine conditioner’s mask.
6.7.
Replacing the conditioner’s tines
(Models: KDTC 260S and KDTC 300S)
Worn tines must be immediately replaced with new ones. Each time, before the work begins, check the
conditioner’s tines along with the bolts on which the tines are mounted and tines’ holders.
CAUTION:
Use genuine bolts and nuts shown in spare parts list.
1. Conditioner’shaft
2. Self-locking nut M12 z. cl. 8.8
3. Washer
∅
12
4. Rubber insert
5. Tine
6. Bolt M12x55 cl. 8.8
Fig. 20. Parts of tine conditioner.
+
+
+
+
----