![background image](http://html1.mh-extra.com/html/samasz/kdtc-260/kdtc-260_operators-manual_3825278026.webp)
Operator’s manual
Rear disc mowers
with central suspension
KDTC 260 S/W; KDTC 300 S/W; KDTC 340
- 24 -
CAUTION:
When replacing knives the engine must be stopped and the cutterbar
must lie on the ground. PTO shaft must be disconnected.
2
1
3
Fig. 15. Quick replacing of the knives with mounting lever.
6.3.
Adjusting the cutterbar
Different swath widths can be reached by replacing discs without the forming drums with discs with
the forming drums, or by putting additional ones. They must be ordered separately. Swath width is
also regulated by swath discs.
CAUTION:
Before you change the knife check disc turns (Fig. 16).
CAUTION:
Because of high discs rpm, knife holders should be changed in sets of the
same weight – on every holder there is its weight written. Improperly
changed knife holders will damage disc bearings.
CAUTION:
Different mounting of the knives will block the mower. When mounting
pay particular attention to loose rotation of the knife on the knife holder
pin.