Operator’s manual
Double-sided disc mowers
with central suspension
- 60 -
Tab. 10.
Oil capacities in swath rollers cog gear
Fig. 51
. Points of check and oil replacement in
swath rollers cog gears
Fig. 52.
Point of lubrication with ŁT43 grease for
non-locating bearing
7.5.
Conveyor integrated drive system
(For:
KDD S/SL/W T (H))
Oil level to be controlled on the external oil level and temperature gauge
A
. Remove oil
filter
B
and top up the oil if needed. Use HYDROL PREMIUM L-HV 46 or other HLP hydraulic
oil with similar characteristic. To drain oil tank remove drain plug
C
, located at the bottom of oil
tank. Oil capacity is of about 8.7 Us Gal lqd.
Fig. 53.
Location of oil level control and refilling points, on the oil tank of the conveyor drive system
7.6.
Lubrication points
Every 50 mower working hours, lubricate tine/roller conditioner’s bearings (
Fig. 54, Fig. 55
)
with
LT43
grease (or other designed to lubricate rolling and slide bearings, that work in -30
to
+130
o
C) and main joints of the mower with
STP
grease
and all connections in cylinders (
Fig. 56
)
with
STP
lubricant.
Model
Oil capacity
[
US gal lqd
]
Oil type –
for gearboxes
Lubrication frequency
Oil type
0.13
80W90
After first 50 h of operation, then after next 500
h
(or at least once a year)
Lubrication
points
A
B
C
A
B
C