Sam4s SPS-500, Reference Manual

Page: 10 / 112

8

Introduction SAM500 Reference Manual V1.0
RS-232C Interface Specifications
Communications Specifications
Asynchronous Operation
Communication Mode Half Duplex
Baud Rate Selectable up to 57,600
Signal Level RS-232C
Character Bits 8
Parity Bits None
Stop Bits 1
Error Detection Data sum check
Installing
Notes:
SAM Polling software requires a LPT or USB software key to be installed on the PC running
the software to access all of the polling and programming features. Software can be installed
on a PC without the key, but it can be used only for program saving/loading.
The connection from the ECR to your PC requires a serial port on the PC. See “Cabling
Diagrams” on page 100 for more information on cables and connections.
1. Load the SAM500 program CD into your CD drive.
2. From the Windows Desktop, double click the My Computer icon.
3. Select your CD ROM drive (usually drive "D".)
4. Choose Setup . The Welcome dialog displays.
5. Click Next . The Ready to Install dialog displays.
6. Click Next . The Install Directory dialog displays.
7. Click Next . The Select Shortcut Folder dialog displays.
8. Click Next . When all files are copied, the Finished dialog displays.
9. Click Finish .
10. Next, the HSAP SRM loads the driver for the software key.
11. When the driver installation is complete, the Aladdin HASP SRM dialog displays.
12. Click OK.
13. Remove the CD ROM. Your installation is complete.