Sam4s SPS-500, Service Manual

Page: 10 / 184

2 Product Specifications
2-4 SAM4S SPS-500 SERIES
2-3 Thermal Printer Specifications
2-3-2 Paper Specification
Item Description Remark
Paper Type

Single-ply Thermal Paper Roll
Paper Size

57.5 mm ± 0.5 mm (Width) × 80 mm or less
Specified Paper

Original Paper No : HPK-110 (Hansol paper XT)
Table2-3 Paper Specification (SPS-520)
Note:
The following paper can be used instead of the specified paper above.
TF50KS-E: Nippon paper industries Co.,Ltd.
PD 160R : New Oji paper Mfg, Co.,Ltd.
F380
: Kansaki specialty papers, Inc. (USA)
2-3-3 Printable Area
The Printable area of a paper with width of 57.5mm is 48mm(384 dots) and the space on the right and left
sides are approximately 4.75mm.
Figure2-3 Printable Area (SPS-520)
2-3-4 Character Specification
Item Description Remark
Character Structure

12(W) × 24(H) Font (Including a Horizontal)
Character Size

1.25 mm(W)
×
3.0 mm(H)
Column Pitch

1.5 mm
Line Pitch

3.75 mm (Including 6-dot Line Spacing)
Number of Column

32 (12 × 24 Dots/Character)
Table2-4 Character Specification (SPS-520)
b
c d e
a
a = 57.5±0.5 mm (Paper Width)
b = 0.125 mm (1 Dot)
c = 48 mm (384 Dots/Printable Area)
d = 4.75 mm (Left Space)
e = 4.75 mm (Right Space)