68
•
Basic Operations
Sam4POS Operators Manual v2.33
Not Found PLU
Designed to be used in a scanning system the
NOT FOUND PLU
feature allows the operator to immediately enter
basic PLU information for an item that is not in the PLU file during the sale. If the "Not Found PLU" message
displays when a PLU is scanned the operator can choose to add the item and will be prompted to enter PLU price,
and if programmed, the descriptor and linking information. The item is registered immediately.
Note: The Not Found PLU feature must be enabled in General Option programming to allow this operation.
The Not Found PLU entry may be restricted to Manager Required operation.
1.
When a PLU that is not in the PLU file is scanned a continuous error tone sounds notifying the operator
the item just scanned is not in the database. The NOT FOUND PLU notification displays:
2.
Press
YES
to add the item. If the
Manager Password
entry dialog appears, enter the appropriate manager
code to proceed. The
REGISTER PLU
entry box displays:
3.
Enter the
PLU DESCRIPTOR, PRICE
(for all price levels)
,
GROUP
assignment and
PLU STATUS
GROUP
assignment for the item, press
OK
when done.
4.
The item is registered in the current transaction and added to the PLU database.
