Sam4s ER-920, Operator'S And Programming Manual

Page: 86 / 241

86 • Operations SAM4s ER-900 Series Operator's & Programming Manual v.1.3
Not Found PLU
The “Not Found PLU” feature is available for use when an optional scanner is used to input
PLUs. If an item is scanned that is not programmed in the PLU file, the operator has the
option to input the price of the item and assign it the same descriptor and properties of
another PLU, or enter the descriptor and tax status independently. This provides a simple
mechanism for building an item file for a low-cost scanning installation.
Not Found PLU: Quick Entry
Action Display Notes
1. Scan or input PLU
NOT FOUND PLU
STOP:0 SAVE:1
2. Press 1
INPUT PRICE
PRESS X/TIME key
3. Enter the item price;
press X/TIME
SELECT COPY PLU
4. Touch a PLU on
Keyboard (or enter PLU
# and press the PLU key)
The item is registered and
displayed
The item is added to the
PLU file with the price as
entered and the descriptor
and options of the PLU that
was entered as the COPY
PLU.
Not Found PLU: Detail Entry
Action Display Notes
1. Scan or input PLU
NOT FOUND PLU
STOP:0 SAVE:1
2. Press 1
INPUT PRICE
PRESS X/TIME key
3. Enter the item price;
press X/TIME
SELECT COPY PLU
4. Enter 0; press PLU
DESC
5. Enter the item descriptor:
press X/TIME.
TAXABLE
You must enter descriptor
by descriptor code. (If
using Quick Entry, you can
enter descriptors later using
the PC Utility.)
6. Enter the tax status (from
digits N1 & N2 of the
PLU Status Program)
press X/TIME.
The item is registered and
displayed
For example, enter 40 for
taxable by tax rate 1. Note
that the item is assigned by
default to PLU Group 1.
Not Found PLU Report
Turn the key lock to
X
or
Z
: enter
15
and press
SUBTOTAL
. Note: Up to 50 not found
PLU items can be retained. When capacity is reached, you must clear (Z) the Not Found
PLU report.