138
•
Program Mode Programming
SAM4S ER-900 Series Electronic Cash Register AU
System Option Programming
Refer to the “
System Option Table
” to review the system options. Read each option carefully to
determine if you wish to make any changes. Default value has been highlighted in
bold
print.
NOTE: Because after Memory All Clear all options settings are automatically set to default, you do
not need to program this section unless you wish to change the default status.
Program 30 - System Option Programming
Programming a System Option:
1.
Turn the control lock to the
PGM
position.
2.
Enter
3 0
, press the
SUBTL
key.
3.
Enter a system option address, press the
X/TIME
key.
4.
Enter the number representing the status you have selected, or if there is more than one
decision to be made in an address, add the values representing your choices for each
decision and enter the sum. Press the
SUBTL
key.
5.
To program additional system option, repeat from step 3, or press the
CASH
key to
finalise system option programming.
System Option Flowchart
Ú
Default values have been highlighted in
bold
SUBTL
X/TIME
Status
CASH
Repeat for each System Option
Option #
SUBTL
0
3
